New Zealand Oil and gas
SHAREPRICE
hero-2.jpg

News

This section of our website includes all of our media releases, speeches and presentations. You can view a topic using the tag cloud, or by the date archive found on the right hand side.

News

Ironbark Weekly Drilling Update #7 As At 17 December 2020 (NZ Time).

Posted on 18 December 2020

As at 06:00 17 December 2020 (AWST) the Operator has advised that the Ironbark-1 well had reached a measured depth of 4380 metres and they are currently drilling the 12¼“ hole. In the past week the Operator completed the 13-5/8” casing and cementing job. They also completed a BOP pressure test.

Read the full post

Ironbark Weekly Drilling Update #6 As At 10 December 2020 (NZ Time).

Posted on 11 December 2020

As at 06:00 10 December 2020 (AWST) the Operator has advised that the Ironbark-1 well had reached a measured depth of 4362 metres and are currently preparing to run casing and cement. In the past week the Operator completed drilling the 16½" hole.

 

Read the full post

Ironbark Weekly Drilling Update #5 As At 3 December 2020 (NZ Time).

Posted on 4 December 2020

As at 6:00 3 December 2020 (AWST) the Operator has advised that the Ironbark-1 well had reached a measured depth of 3801 metres and is continuing to drill the 16½” hole. In the past week we continued to drill the 16½" hole.

Read the full post

Ironbark Weekly Drilling Update #4 As At 26 November 2020 (NZ Time)

Posted on 27 November 2020

As at 6:00 26 November 2020 (AWST) the Operator has advised that the Ironbark-1 well had reached a measured depth of 3040 metres.

Read the full post

Ironbark Weekly Drilling Update #3 As At 19 November 2020 (Nz Time).

Posted on 20 November 2020

As at 6:00 18 November 2020 (AWST) the Operator has advised that the Ironbark-1 well had reached a measured depth of 2410 metres.

Read the full post

Ironbark Weekly Drilling Update #2 As At 12 November 2020 (Nz Time).

Posted on 13 November 2020

As at 6:00 11 November 2020 (AWST) the Operator has advised that the Ironbark-1 well had reached a measured depth of 1811 metres.

 

Read the full post

Ironbark Weekly Drilling Update #1 As At 5 November 2020 (Nz Time).

Posted on 6 November 2020

As at 00:00 4 November 2020 (AWST) the Operator has advised that the Ironbark-1 well had reached a measured depth of 1,583 metres.

Read the full post

Annual Meeting Results

Posted on 5 November 2020

Seven resolutions were voted on by shareholders at the Annual Meeting of New Zealand Oil & Gas held online today, 4 November 2020. Results were as follows:

Read the full post

Drilling Commences at Ironbark

Posted on 2 November 2020

Drilling is underway at the Ironbark-1 well in WA-359-P in the North Carnarvon Basin off the North West coast of Australia.

Read the full post

September 2020 Quarterly Reports Released

Posted on 30 October 2020

The NZOG June 2020 Quarterly Report and Quarterly Cash Flow Report are now released and available to be read online by clicking here

Read the full post